Installation of Lining


How to start working with us.

Geolance is a marketplace for remote freelancers who are looking for freelance work from clients around the world.


Create an account.

Simply sign up on our website and get started finding the perfect project or posting your own request!


Fill in the forms with information about you.

Let us know what type of professional you're looking for, your budget, deadline, and any other requirements you may have!


Choose a professional or post your own request.

Browse through our online directory of professionals and find someone who matches your needs perfectly, or post your own request if you don't see anything that fits!

Finishing materials for various types of premises include wood or PVC lining. They are generally a collection of distinct pieces with grooves and cutouts for mutual connection pre-installed. Naturally, the lining's liner installation is a specialized job that requires skilled labour. Despite significant distinctions, installing wooden and plastic linings is comparable.

Stages of clapboard cladding

A crate is formed from four 2x4 cm wooden beams at the first stage. They are directly connected to the wall or ceiling, with appropriate fastening control, and are 50-70cm apart. The following are the purposes of the crate: The preparation of the surface for an even installation of the lining (usually when walls and ceilings are not entirely flat); the opportunity to install heat-insulating material beneath the line.

The next step is to put the inside of the crate on directly. When laying wood panelling, be sure to pay attention to the following access point: It's not necessary to trash boards with cracks; instead, fill them with carpentry glue and leave them for a day. Shots will go away completely; n Before putting in a pine needle lining, use acetone to remove any resin from its surface; it's also advised that you use specific treatments against tree decay. If PVC lining is chosen, it should be considered that it is more suitable for bathrooms or balconies - living quarters must be trimmed with wood. Wherever the pipe lining will cover the incoming pipe connections, a small pipelining is cut out before installation to avoid obscured relationships.

There are two main types of wall lining: directly anchored wall lining and independent wall lining systems. In the field of drywall installation, wall lining is like a second wall in front of the room's solid walls. It is either used to create a straight wall surface when the subsurface is crooked or contains interior insulation.

The anchor provides a secure and firm hold to kitchen and living room cupboards, shelves, coat racks or mirrors by expanding behind the plasterboard panel. Please make sure the cavity behind the board is big enough to allow the anchor to fit through before it folds. Directly anchored wall lining often has insufficient space behind it to enable this anchor to be used. As a general rule, anchors and screws must be compatible with the fixing base and application. This protects the drywall material and prevents cracks and breakages. Plastic plasterboard anchors provide a secure hold for mirrors, pictures, smoke detectors and light lamps on lined walls or ceilings. 

There are two ways to get the liner into the pipe. The first way is to pull it into the tube using a cable. The liner is drawn into a precise location so that the pre-cut connections line up where the incoming pipes are. The second way the liner may be installed is to “invert” or “shoot” it into the tube. In essence, the liner is rolled into a tank that has a gun barrel on one end and compressed air on the other. The gun barrel is inserted into the pipe, and the compressed air is released, which launches the liner into the line.

The first way to install a lining is to fasten it directly to the surface that requires finishing. The surface must be smooth, clean, and free of dust in this case. The most common material used to attach the lining is plaster, which has water-resistant properties after it dries.

A general rule of thumb for choosing whether to use nails or screws when attaching the liner is that the smaller and lighter your items are, the fewer nails you need. The more heavy-duty and robust your things are, the more screws you will need.

Once the liner is in the pipe, it is essential to inflate it to take on the pipe's shape. This is done by either blowing into the tube or using a compressor to inject air into the liner. The more the liner is inflated, the less chance it will collapse or be damaged as it is being transported.

Professional installation of lining

The lining is attached in two ways: vertically, using specialized fasteners, and horizontally, via nails or clamps of a specific pattern. Various attachments are employed during the installation procedure: connecting profiles, internal and external corners, and ceiling plinths. Their goal is to provide corner fixation and height difference adornment. Given that the lining installation is a time-consuming and laborious process, you should not try to complete it on your own. It will be quicker and more profitable to outsource this work to an executor with Geolance who has adequate information and expertise.

Geolance is an on-demand staffing platform

We're a new kind of staffing platform that simplifies the process for professionals to find work. No more tedious job boards, we've done all the hard work for you.

Geolance is a search engine that combines the power of machine learning with human input to make finding information easier.

© Copyright 2022 Geolance. All rights reserved.